News

This quick measuring guide will walk you through the necessary steps to assess your trunk space effectively.

Following these straightforward instructions and measuring charts, you can confidently choose a Klaxon camping box that fits perfectly, ensuring a smooth and enjoyable outdoor adventure.

1. Trunk Door Width: Begin by measuring the width of the trunk door.

2. Trunk Door Depth: Next, measure the depth of the rear trunk door. It is recommended to reduce this measurement by 2-3 fingers to accommodate the curvature of both the seat and the trunk.

3. Trunk Height: Measure the height from the trunk's horizontal plane to the vehicle's ceiling.

4. Narrowest Trunk Width: Identify and measure the width at the narrowest point of the trunk area.

5. Distance Between 2^nd Row Seats and Trunk: Fold down the second row of seats and remove any headrests. Measure the distance between the trunk and the back of the second row of seats. If the seats are curved after folding, ensure to measure the horizontal distance and consider reducing the measurement by 2-3 fingers to account for the curvature.

6. Distance Between First Row Seats and Trunk: Measure the distance from the trunk to the first row of seats, adjusting the front seats as necessary. If the seats are curved after folding, focus on measuring the horizontal distance and apply the same 2-3 finger reduction for accuracy.

7. 2^nd Row Seat Height Difference Measurement: Check for any height difference between the second-row seats and the horizontal plane of the trunk, and record this height difference.

8. Trunk Door vs. Trunk Plane Height (Kitchen Pack): Lastly, measure any height difference between the trunk door and the trunk plane. Be sure to assess the depth on both sides and the middle of the door for accuracy.

Finally, compare the data you collected with the following chart to check which camping box fits your car!

Measurement Chart For Klaxon Camping Box - Metric (mm)

Measurement Chart For Klaxon Camping Box - Imperial-US units (inch)